Carrier Thermostat How To Set

User Manual

Carrier Infinity Control Thermostat

The New Feeling of Comfort

CONGRATULATIONS!

Your decision to choose the Carrier Infinity™ Control puts you in a select grouping of homeowners who empathise the value of precise condolement control and capeesh the simplicity of an like shooting fish in a barrel-to-use, intuitive, user interface.

We sincerely appreciate you putting your trust in Carrier. Carrier has been delivering the finest indoor comfort equipment since 1902. Your new Infinity Control offers yet another example of the high quality comfort engineering for which we are recognized.

Please accept a few moments to review this transmission…gear up up a comfort schedule that makes sense for your lifestyle…then relax and enjoy the condolement!

• Current Zone
• Zone Button used to folio through zones.
• Room Temperature
• Day & Time
• Fourth dimension Flow displays the condolement schedule'due south active period.
• Left Button provides accessary status.
• Hold/Unoccupied Push maintains desired temperature indefinitely or activates "unoccupied" condolement settings.
• Fourth dimension (+\-) Button
• Schedule Button used to access and exit the comfort schedule.
• Holiday Button activates/deactivates holiday comfort settings.
• Gyre Button used to move up and downwards the screen during scheduling and setup.

Overview

QUICK GUIDE INSTRUCTIONS

This guide provides the basic operations for setting upward and operating your Infinity™ Control.

Gear up Mean solar day, Time & Desired Humidity

1. Flip down the door at the base of operations of the Infinity™ Control.
2. Printing the Basic push.
3. Arrange the highlighted HOUR setting using the TIME (+\-) button.
4. Press SCROLL to highlight MINUTE.
5. Adjust the Infinitesimal setting using the Fourth dimension (+\-) button.
6. Press SCROLL to highlight Solar day.
7. Adjust the electric current DAY setting, using the TIME (+\-) push, until the correct 24-hour interval is displayed.
8. Press Curlicue to highlight HUMIDITY.
9. Press the carmine HEAT button to set the heating humidity.
10. Adjust the desired heating humidity using either (+\-) button.
11. Printing the blue Absurd button to set up the cooling humidity.
12. Adjust the desired cooling humidity using either (+\-) button.
13. Press Bones or close the door to exit.

Suit Heating Temperature

1. Press the ruby-red Oestrus button. Heating is confirmed when the cerise LED side by side to the red HEAT push is lit.
2. Press the ZONE push until the name of the zone you wish to control appears on the upper left screen. Selecting "ALL ZONES" allows you to select one temperature for the entire home. Press the ZONE button for iii seconds to actuate the "ALL ZONES" feature.
3. Use the TEMP (+\-) button to select your desired temperature, which will exist displayed on the lower right. An override fourth dimension will be displayed on the lower left. Please note an override time will non appear if programming has been turned off.
4. You lot tin can change the override time in xv-minute increments by pressing the Fourth dimension (+\-) button until the desired override time is selected.
   – OR –
   Printing the Concord button to override the schedule indefinitely

Accommodate Cooling Temperature

1. Press the blue Absurd button. Cooling is confirmed when the blue LED next to the blueish CL button is lit.
2. Press the ZONE push button until the name of the zone yous wish to command appears on the upper left screen. Selecting "ALL ZONES" allows you to select i temperature for the unabridged home. Printing the ZONE button for iii seconds to activate the "ALL ZONES" feature.
3. Use the TEMP (+\-) button to select your desired temperature, which volition exist displayed on the lower right. An override time will be displayed on the lower left. Please notation an override fourth dimension volition not announced if programming has been turned off.
4. Yous can alter the override time to xv-minute increments by pressing the TIME (+\-) button until the desired override time is selected.
   – OR –
   Press the Agree push button to override the schedule indefinitely.

Quick Programming Instructions
These instructions will guide you through creating one comfort schedule that will repeat every 24-hour interval. For more details on programming, or to create customized schedules for the week, weekend, or each day, refer to PROGRAMMABLE FEATURES, SETUP & Functioning on pages 17 – 26 of this transmission.

Ane Schedule for All Days

1. Flip downward the door at the bottom of the control.
2. Press the SCHEDULE push button.
3. Press the ZONE push until the proper noun of the zone yous wish to programme appears on the upper left screen. Selecting "ALL ZONES" allows you to create one schedule for the entire home.
4. Press either the LEFT or Right push repeatedly until "ALLDAYS" is displayed.
5. The WAKE fourth dimension flow volition be highlighted. Set the outset time for this time period using the TIME (+/-) push button.
6. Printing the red HEAT button. Heating temperature will begin flashing.
7. Set up the heating temperature using the TEMP (+\-) push button.
8. Printing the blue Absurd button. Cooling temperature will brainstorm flashing.
9. Set the cooling temperature using the TEMP (+\-) button.
10. Prepare the remaining periods, "Twenty-four hours," "EVENING," AND "Sleep" by using the Coil button to select a time period, then follow steps five – nine to select temperature and time settings.
11. Exit the scheduling way past either closing the door or pressing the SCHEDULE button.
    – OR –
12. To create a custom schedule for the remaining zones, press the ZONE push button to select the next zone you wish to program. So, repeat steps four – 10 in this section.

Pop-upwards Messages
Your Infinity™ Command provides important and useful maintenance and service reminders via pop-up messages on the display.

Accessory Maintenance Reminders: An accompaniment reminder lets you know when it's time for maintenance of your air filter, humidifier pad, UV lamp or ventilator. When an accessory reminder pop-upwardly message appears, perform the accessory maintenance yourself OR contact your dealer/contractor.

Service Reminders: When a service reminder pop-up message appears, contact your dealer/contractor. See Accompaniment MAINTENANCE OR SERVICE POP-Upwards MESSAGES on pages 14 – 15 in this transmission for additional data.

BASIC SETUP

Set 24-hour interval, Fourth dimension & Desired Humidity

1. Flip downward the door at the base of the Infinity™ Control.
2. Printing the BASIC button.
3. Adjust the highlighted HOUR setting using the TIME (+\-) button.
4. Press Scroll to highlight MINUTE.
5. Adjust the MINUTE setting using the TIME (+\-) button.
6. Press Whorl to highlight DAY.
7. Arrange the electric current DAY setting, using the Fourth dimension (+\-) button, until the correct solar day is displayed.
8. Press Coil to highlight HUMIDITY.
9. Press the red Heat push button to ready the heating humidity.
10. Conform the desired heating humidity using either (+/-) push.
11. Printing the blue Cool button to set the cooling humidity
12. Adapt the desired cooling humidity using either (+/-) button.
13. If a ventilator has been installed, printing scroll to highlight FRESH AIR.
14. Arrange your desired FRESH AIR setting using the TEMP (+/-) button. For a description of fresh air settings, run into FRESH AIR VENTILATION on folio 28 in this manual.
15. Printing the BASIC button to exit.
    – OR –
    If you need to readjust 1 of your settings, use the SCROLL push to highlight the desired setting, then make your changes.
16. Shut the door.
    NOTE: You tin can go out at any time. When exiting, yous volition be prompted to save changes if you take made whatever. Select "Yeah" to save your changes, "NO" to revert back to previous settings.

NORMAL Operation

Turn Arrangement On/Off
The OFF push is used to plough the arrangement both on and off.

Heating

To select heating, press the red Rut button. Heating is confirmed when the red LED next to the red Oestrus push button is lit. Heating is operating when the red LED is gradually pulsing on and off. (The LEDs can be turned off. For details, run across ADVANCED SETUP – LIGHTING on page 30.) The heating temperature will announced in the lower right screen with the text, "Oestrus AT."

Auxiliary Heat
Auxiliary oestrus is staged electrical heating included with many heat pump systems. Auxiliary estrus is automatically activated by the arrangement when it's too cold for the heat pump to effectively estrus your dwelling. Auxiliary heat operation is confirmed when the crimson LED adjacent to the red HEAT button is lit, gradually pulsing on, then off. (The LEDs tin can be turned off. For details, meet ADVANCED SETUP – LIGHTING on page 30.) The text, "AUXILIARY Heat Active" will announced below the room temperature.

Emergency Oestrus
Emergency oestrus is staged electric heating included with many heat pump systems. Emergency rut is activated either when the estrus pump has malfunctioned and heating is required, or when the homeowner manually activates emergency oestrus. Emergency oestrus is manually activated by pressing the red Oestrus button for four seconds. To activate Emergency Rut, press the ruby-red HEAT push for iv seconds. If your system is a heat pump with electric heat, then the display will show the three choices:

System INCONTROL (the system will cull the blazon and amount of heat needed for conditions) HEATPUMPONLY (only the rut pump will be used for heating) Electric HEATONLY (merely electric estrus will be used for heating)

If your system is a Hybrid Estrus™ system (estrus pump with gas or oil furnace), then the brandish will show the 3 choices: HYBRID HEAT™ (the system will choose the type and amount of estrus needed for conditions) FURNACE ONLY (only the furnace will be used for heating) HEAT PUMP ONLY (only the heat pump will exist used for heating)

Scroll the highlight to your option using the roll push button under the door, then press the left side push to save your selection and exit.

To deactivate Emergency Heat, press the cherry Estrus button for four seconds and choose Organization IN CONTROL or HYBRID HEAT, depending on your type of heating equipment.

Cooling

To select cooling, press the blue Cool button. Cooling is confirmed when the blue LED adjacent to the blueish COOL button is lit. Cooling is operating when the blue LED is gradually pulsing on and off. (The LEDs can be turned off. For details, run across ADVANCED SETUP – LIGHTING on page 30.) The programmed cooling temperature will appear in the lower correct screen with the text, "Absurd AT."

Auto

The AUTO function allows your Infinity™ Command to automatically switch between heating and cooling operation to maintain your condolement during transitional heating and cooling seasons. To select AUTO functioning, press the ruby-red HEAT and blue COOL buttons simultaneously. The red and blueish LEDs will calorie-free up, and both heating and cooling temperatures volition be displayed.

Adjust Heating Temperature
The Infinity™ Control allows you to adjust your indoor temperature at any time, overriding your programmed settings.

1. Printing the cherry-red Estrus button. Heating is confirmed when the red LED adjacent to the cherry-red Estrus button is lit.
2. Press the ZONE button until the name of the zone you lot wish to control appears on the upper left screen. Selecting "ALL ZONES" allows yous to select one temperature for the entire home. Press the ZONE button for three seconds to actuate the "ALL ZONES" features.
3. Use the TEMP (+\-) button to select your desired temperature, which will be displayed on the lower right. An override time will exist displayed on the lower left. Please note an override time will not appear if programming has been turned off.
4. You can change the override time in 15-infinitesimal increments by pressing the TIME (+\-) push button until the desired override fourth dimension is selected.
   – OR –
   Printing the Hold button to override the schedule indefinitely.

Conform Cooling Temperature

1. Press the blue COOL push button. Cooling is confirmed when the blueish LED adjacent to the blueish COOL button is lit.
2. Printing the ZONE button until the name of the zone y'all wish to control appears on the upper left screen. Selecting "ALL ZONES" allows you to select one temperature for the entire home. Press the ZONE button for 3 seconds to activate the "ALL ZONES" feature.
3. Use the TEMP (+\-) push button to select your desired temperature, which will be displayed on the lower right. An override time will be displayed on the lower left. Please note an override fourth dimension will non appear if programming has been turned off.
4. Yous tin change the override time in 15-minute increments by pressing the Fourth dimension (+\-) button until the desired override time is selected.                                                                    – OR –
   Printing the HOLD push to override the schedule indefinitely.

Adjust Fan Speed
The Infinity™ Command offers the do good of customized fan speeds during continuous fan operation. Fan speeds can be individually selected for each zone also.

1. Printing the ZONE button until the proper name of the zone you wish to control appears on the upper left screen. Selecting "ALL ZONES" allows you to change fan speed for the entire home. Printing the ZONE button for three seconds to activate the "ALL ZONES" feature.
2. Press the FAN push to adapt the fan speed between LOW, MEDIUM, High or AUTO airflow. OFF is also a selection when the system has been turned off at the Infinity Control. Your fan speed selection will merely apply to the displayed zone.

Hold Electric current Temperature
Press the HOLD button to override the plan and maintain the electric current indoor temperature set point(s) indefinitely.

To revert back to your programmed comfort schedule, press the HOLD button again.

Annotation: HOLD is non available if programming has been turned off. Too, if yous switch from HOLD to either Vacation or UNOCCUPIED, the organisation will revert back to HOLD when those functions are cancelled.

Unoccupied Function & Settings
UNOCCUPIED allows you lot to instantly set the system for free energy saving functioning.

1. To select UNOCCUPIED functioning, press the Concord push button for 3 seconds. UNOCCUPIED text will exist displayed.
2. To take your system out of UNOCCUPIED mode, press the HOLD push for two seconds.

Details for selecting UNOCCUPIED temperature, humidity and fan setting defaults are provided in the Advanced SETUP section of this manual, page 34.

Vacation Function & Settings

Vacation performance conserves energy while yous are away and ensures a comfortable habitation upon your render.

1. Flip down the door virtually the base of operations of the Infinity™ Control.
2. Press the Vacation button.
3. Use the TEMP (+\-) button to select the desired temperature for VACATION operation.
4. Use the Fourth dimension (+\-) button to select the number of days for Vacation functioning as seen in lower left corner of screen.
5. Press the Vacation button to start VACATION operation.
6. Y'all will be prompted to start Vacation operation. Press the RIGHT button for Yeah or press the LEFT button for NO.
   Annotation: You have upwardly to 15 minutes to make changes to the temperature or elapsing afterward VACATION has been activated. Any changes made afterward the 15 infinitesimal menstruation will exist treated as a temporary override to holiday settings.
7. The organization will automatically revert back to its normal functioning afterward the selected number of Vacation days has expired.
   – OR –
   To cancel VACATION operation at whatever time simply press the Holiday push button. You volition exist prompted to cancel Vacation operation. Press the Right push button for Yes or printing the LEFT push for NO.

Details for selecting default temperature, humidity, and fan settings for VACATION are provided in the Advanced SETUP section of this manual, page 33.

Check System Status
The system status function allows you lot to view detailed information
about the system'southward condition.

1. Press and agree the Right button for two seconds to check:
   – Equipment status
   – Accessory status
   – Current humidity
   – Target humidity
2. Press the RIGHT button over again (from the Condition screen) for zoning status.
3. Printing the RIGHT button again to render to the main screen.
   – OR –
   The status screen will automatically revert dorsum the primary screen later threescore seconds.

Accompaniment Status
The accessory status screen allows you lot to bank check the approximate usage of your mechanical or electronic air cleaner, humidifier pad, and UV lamps earlier routine maintenance is required. The accompaniment status screen also shows your servicing dealer'south name and telephone number. You may also reset the usage indicators for your accessories from this screen.

1. Printing and agree the LEFT button for two seconds to prove the status of:
   – Air filter (FILTER)
   – Humidifier pad (HUM. PAD)
   – UV Lamps
2. Press the Right button to leave.

Resetting Accompaniment Usage Indicator
Later an air filter, humidifier pad, or UV Lamp has been replaced or cleaned, you may need to manually reset the pct used indicator for the corresponding accompaniment.

1. Press and hold the LEFT push to access the Accessory STATUS screen.
2. Use the Curl button to highlight the accessory you wish to reset.
3. Press the Right push to reset the selected accessory.
4. Press the LEFT button to exit.
   – OR –
5. Keep to reset accessory usage indicators as desired.

Accompaniment Maintenance Popular-Up Letters
Accessory Pop-Up messages remind you when it's time for accessory maintenance. There can exist upwards to five letters, depending on the accessories installed with your system:

• Replace UV Lamps
• Change Humidifier Pad
• Clean Air Filter – EAC
• Make clean or Supercede Air Filter
• Clean Ventilator Filter

REMIND Later on: Pressing the LEFT push to select

REMIND LATER will cause the accompaniment status message to reappear in seven days. The message will not reappear at the cease of the seven-day period if the usage indicator has been reset.

DISMISS Notice: Printing the RIGHT button to DISMISS NOTICE and reset the accessory maintenance reminder. The reminder will reappear at the next maintenance wheel.

The maintenance bike for the humidifier, UV lamp and EAC is based on fourth dimension and may be set past your installer. The defaults are equally follows:

• EAC: 3 months of functioning
• Humidifier: 12 months of operation
• UV Lamp: 12 months of operation
• Ventilator Filter: 3 months of operation

The maintenance cycle for MEDIA or EAC + MEDIA is based on actual airflow restriction which is automatically detected by the system.

Service Popular-Upward Messages
Service Popular-Upwardly letters remind you when information technology'south fourth dimension for routine equipment maintenance or if the system has malfunctioned.

ROUTINE MAINTENANCE RECOMMENDED: This pop-up appears when seasonal maintenance should be performed to maintain optimum performance of your system. Press the RIGHT button to DISMISS NOTICE and reset the maintenance reminder. The reminder will non reappear until the routine maintenance timer has expired (default 12 months). The reminder volition not announced if it has been turned off by the installer.

Organization MALFUNCTION: This popular-up appears when the system has detected an equipment failure. Press the RIGHT button to DISMISS Detect. The organisation may continue to operate, however total system shutdown could occur at whatsoever time. Information technology is highly recommended that you contact your dealer immediately. The popular-up will reappear in 24 hours if the equipment failure has not been corrected.

Keyboard Lock-Out
You tin lock the Infinity™ Control buttons to help avoid inadvertent changes to your settings.

Keyboard lock-out can Simply be activated from the main screen. To do so, simultaneously printing the ZONE and FAN buttons for 2 seconds. Keyboard lock-out will be indicated past a graphic lock on the screen.

To unlock the control, simultaneously printing the ZONE and FAN buttons for ii seconds.

PROGRAMMABLE FEATURES, SETUP & Operation

Backlighting
The Infinity™ backlight feature makes the screen easy to read, even at dark or in low calorie-free atmospheric condition. Loftier-intensity backlighting is activated when a push is pushed or the door at the base of operations of the unit is opened. The backlighting will automatically turn off or revert to a lower intensity abiding backlighting after 10 seconds of no button activity or 30 seconds after the door is opened. Backlighting will remain on throughout Programming, Basic Setup, and Advanced Setup. Constant backlighting can be turned off or adapted in ADVANCED SETUP, page 30 in this manual.

Determining Your Comfort Schedule
Earlier yous plan the Infinity™ Command, take a moment to plan your comfort schedule. Each 24-hour interval of the calendar week is divided into four fourth dimension periods:

• WAKE
• Mean solar day
• EVENING
• SLEEP

You can select a different heating and cooling temperature for each zone and each time period, based on your daily or weekly schedule. Using the nautical chart provided, enter a start time, heating temperature and cooling temperature. And then y'all can employ this chart when you begin programming. You may want to create a similar chart for each zone in your home.

Programming Your Comfort Schedule
The Infinity™ Command allows you maximum flexibility in creating a comfort schedule that best matches your lifestyle. Yous can choose to keep it simple with the aforementioned schedule every day…you tin can create 1 schedule for the work week and one for the weekend…or, you can brand every day different. Instructions for programming this control are detailed on the pages that follow.

NOTE: You lot can quit the programming process at any fourth dimension past simply pressing the SCHEDULE BUTTON or closing the door at the bottom of the control. You volition be prompted to either save your changes or to ignore the changes using the RIGHT or LEFT buttons.

One Schedule for All Days

You tin can create one schedule for all seven days of the week using the ALL DAYS screen.

1. Flip downwardly the door at the lesser of the control.
2. Press the SCHEDULE push button to access the schedule screen.
3. Press the ZONE button until the name of the zone you lot wish to program appears on the upper left screen. Selecting "ALL ZONES" allows you to create i schedule for the unabridged home.
4. If the text "ALL DAYS" appears at the tiptop of the screen, y'all are fix to outset.
   – OR –
   Printing either the LEFT or Right button repeatedly as necessary until "ALL DAYS" is displayed. The WAKE time menstruation will be highlighted.
5. Using the TIME (+\-) button, fix the start time for this time period.
6. Press the cherry-red Heat button. Heating temperature will begin flashing.
7. Set up the heating temperature using the TEMP (+\-) push button.
8. Press the blue Cool button. Cooling temperature will begin flashing.
9. Set the cooling temperature using the TEMP (+\-) button.
10. Employ the SCROLL push to highlight the adjacent period, and then echo steps five – 9 to select settings for Mean solar day, EVENING and SLEEP.
11. Leave the scheduling mode by either endmost the door or pressing the SCHEDULE push.
    – OR –
12.  To create a custom schedule for the remaining zones, printing the ZONE push to select the next zone you lot wish to plan. Then, repeat steps 4 – 10 in this section.
13. To create an identical schedule for another zone, skip ahead to the Copying a Zone Schedule section in this transmission, page 24.
    NOTE: A default set of heating and cooling setback temperatures, called UNOCCUPIED settings, may be activated by pressing the Agree push button. "UNOCC" will appear in place of "Menstruation" when the unoccupied settings accept been activated. UNOCCUPIED setting defaults tin exist changed in ADVANCED SETUP, page 34.

Weekdays Schedule
You can programme one schedule for Monday through Friday using the WEEKDAYS screen.

1. Flip down the door at the lesser of the control.
2. Printing the SCHEDULE button to access the schedule screen.
3. Select the zone you want to program by pressing the ZONE button until the correct zone name appears on the upper left screen. Selecting "ALL ZONES" allows you to create one WEEKDAYS schedule for the entire home.
4. If the word "WEEKDAYS" appears at the tiptop of the screen, you are ready to outset. If non, printing either the LEFT or RIGHT button as necessary until "WEEKDAYS" is displayed. The WAKE time period volition exist highlighted.
5. Using the Fourth dimension (+\-) push, prepare the get-go time for this time menses.
6. Press the red HEAT push button. Heating temperature will begin flashing.
7. Fix the heating temperature using the TEMP (+\-) push button.
8. Press the blue COOL push button. Cooling temperature will begin flashing.
9. Set up the cooling temperature using the TEMP (+\-) push.
10. Use the Ringlet button to highlight the side by side period, then echo steps v – 9 to select settings for DAY, EVENING and SLEEP.
11. Leave by pressing the SCHEDULE button or closing the door.
    – OR –
12. To create a WEEKDAYS schedule for the remaining zones, press the ZONE button to select the next zone y'all wish to programme. Then, repeat steps iv – 10 in this department.
    – OR –
13. Begin inbound your WEEKEND schedule by pressing the RIGHT button and following the Weekend Schedule instructions (the next department in this manual).

Weekend Schedule
You can program an identical schedule for Saturday and Sunday using the WEEKEND screen.

1. Flip down the door at the lesser of the command.
2. Press the SCHEDULE button to access the schedule screen.
3. Select the zone you desire to program past pressing the ZONE button until the correct zone proper name appears on the upper left screen. Selecting "ALL ZONES" allows you to create one WEEKEND schedule for the entire abode.
4. If the word "WEEKEND" appears at the top of the screen, you are prepare to first. If not, press either the LEFT or Right button as necessary until WEEKEND is displayed. The WAKE fourth dimension period will be highlighted.
5. Using the Time (+\-) button, set the start time for this menstruum.
6. Printing the scarlet HEAT push. Heating temperature will begin flashing.
7. Set up the heating temperature using the TEMP (+\-) button.
8. Press the blue Cool button. Cooling temperature volition begin flashing.
9. Set the cooling temperature using the TEMP (+\-) button.
10. Using the SCROLL push button to highlight the next menstruum, repeat steps v – 9 to select Day, EVENING and SLEEP.
11. Exit by pressing the SCHEDULE button or closing the door.
    – OR –
12. To create a WEEKEND schedule for the remaining zones, press the ZONE button to select the next zone y'all wish to program. Then, repeat steps 4 – 10 in this section.
    – OR –
13. Begin entering a separate schedule for private days by pressing the Correct push and following the instructions in the Daily Schedule (the next section in this manual).

Daily Schedule
You can programme a different schedule for each twenty-four hours of the week by using the SUNDAY, Mon, TUESDAY, Wednesday, THURSDAY, FRIDAY and SATURDAY screens.

1. Flip downward the door at the bottom of the control.
2. Printing the SCHEDULE push button to access the schedule screen.
3. Select the zone you desire to program past pressing the ZONE button until the correct zone name appears on the upper left screen. Selecting "ALL ZONES" allows you lot to simultaneously program i day across all zones.
4. If the word "Lord's day," "MONDAY," "TUESDAY," "WEDNESDAY," "THURSDAY," "FRIDAY," or "SATURDAY" appears at the tiptop of the screen, you are ready to starting time.
5. If not, press either the LEFT or RIGHT button repeatedly equally necessary until the day of the week yous want to select is displayed. The WAKE menses will be highlighted.
6. Using the TIME (+\-) button, set the beginning fourth dimension for this time period.
7. Printing the ruby HEAT button. Heating temperature will brainstorm flashing.
8. Set the heating temperature using the TEMP (+\-) button.
9. Press the blue COOL button. Cooling temperature volition begin flashing.
10. Ready the cooling temperature using the TEMP (+\-) button.
11. Using the SCROLL button, highlight the next time catamenia, and echo steps 5 – 9 to select settings for DAY, EVENING and SLEEP.
12. Repeat steps five – 11 in this section for each solar day yous would like to schedule or use the Re-create DAY function.
13. Exit by pressing the SCHEDULE button or endmost the door.

Copy Solar day

1. To Copy a daily schedule to some other day, use the Roll push to highlight the COPY Mean solar day part.
2. Y'all will be prompted to select Aye to continue or NO to render to the schedule screen. Press the RIGHT button to access the Re-create DAY screen.
3. Utilise the Curl push button to highlight the outset day to which you wish to copy.
4. Employ the TEMP (+\-) button to select YES to copy, or NO to not copy.
5. Echo steps 2 & 3 until Yep appears for each day to which you would like to copy.
6. Printing the Correct push button to copy or the LEFT button to cancel.
7. A confirmation screen will listing the days you have selected. If the list is right, press the Correct push button to confirm and return dorsum to the SCHEDULE function. If you would similar to brand a alter, press the LEFT button to return to the COPY Twenty-four hour period screen.
   Notation: You tin can quit the programming process at any fourth dimension by simply pressing the SCHEDULE BUTTON or closing the door at the lesser of the control.

Copying a Zone Schedule
Y'all can copy an ALLDAYS schedule from one zone to some other. Individual day, WEEKDAYS, and WEEKEND schedules cannot be copied to and from zones.

1. Press the SCHEDULE button to access the schedule screen.
2. Printing the ZONE button until the proper noun of the zone you wish to copy from appears on the upper left screen.
3. If the text "ALLDAYS" appears at the elevation of the screen, you are set up to kickoff.
   – OR –
   Press the LEFT or RIGHT button as needed until the text "ALL DAYS" is highlighted.
4. From the ALLDAYS screen, scroll down to the Copy ZONES prompt. Press the RIGHT push.
5. You will be prompted to select Yes to proceed or NO to return to the schedule screen. Printing the Correct push button to select YES.
6. Use the SCROLL push to highlight the first zone to which you would like to copy.
7. Use the TEMP (+\-) push to select YES to re-create, or NO to not copy.
8. Repeat steps 6 & vii until Yes appears with each zone to which you would similar to re-create.
9. Press the Correct button to copy or the LEFT push button to cancel.
10. A confirmation screen will list the zones to which you would like to copy. If the list is right, press the RIGHT button to ostend and return back to the SCHEDULE screen. If you would like to make a change, press the LEFT button to return to the Copy ZONE screen.
11. Exit the scheduling mode by either closing the door or pressing the SCHEDULE push button.

Programming Fan Speed
You can select a dissimilar fan speed for each time period of your condolement schedule. Scheduling the fan speed follows the same bones steps as programming fourth dimension and temperature settings. You can create one fan schedule for ALL DAYS, WEEKDAYS, WEEKENDS, or a unlike schedule for each twenty-four hour period.

Programmable fan is automatically defaulted to off. Your dealer will need to turn programmable fan on in the dealer thermostat setup screen.

1. Flip down the door at the bottom of the control.
2. Printing the SCHEDULE button to access the schedule screen.
3. Press the ZONE button until the name of the zone you wish to program appears on the upper left screen. Selecting "ALL ZONES" allows you to create one schedule for the entire home.
4. Printing the FAN push button to access the Fan Speed programming screen.
5. Press the LEFT or Right push to select the days you wish to program – ALLDAYS, WEEKDAYS, WEEKEND, or choose a specific mean solar day (Monday, TUES, Midweek, etc.).
6. Using the Fourth dimension (+\-) button, select your desired fan speed – LOW, MED, HIGH or Motorcar.
7. Utilize the Whorl push button to highlight the next period, and then repeat steps 5 and half dozen to select settings for DAY, EVENING and SLEEP.
8. Press the FAN button to return to the standard scheduling screen.
   – OR –
9. Exit the scheduling mode by either endmost the door or pressing the SCHEDULE push button.
   – OR –
10. To create a customized fan speed schedule for the remaining zones, press the ZONE button to select the next zone yous wish to program. Then, repeat steps 5 – 7.

ZONE  FEATURES, SETUP & Performance

Each zone in your habitation has a separate sensor to help monitor that zone's conditions. The Infinity™ Command is your chief interface for setting and changing each zone's comfort schedule.

Checking Zone Status
The zone condition may be observed from optional Smart Sensors or the Infinity Control. To check zone status from the Infinity Command, printing the ZONE button on the upper left side of the control until the zone you desire to check appears.

Naming Your Zones
Each zone can exist given a distinct name past the homeowner. Details on customizing zone names can be found in the Avant-garde SETUP section, page 35.

Programming Each Zone
Zones can be programmed the same mode or individually. Details for programming zones are outlined in the PROGRAMMABLE FEATURES, SETUP & Performance section of this manual, pages 17-26.

VENTILATION FEATURES, SETUP & OPERATION

Fresh Air Ventilation
A fresh air ventilator is used to commutation stale indoor air for fresh outdoor air. Fresh air ventilation tin be customized with upwardly to four settings. The setting you cull for heating functioning can be dissimilar from the setting y'all choose for cooling. The indoor fan will operate while the ventilator operates.

HIGH: The fresh air ventilator will operate at high. This setting is recommended to help speedily remove unwanted odors.

Depression: The fresh air ventilator volition operate at low continuously. This setting is recommended for continuous performance in mild climates with low humidity.
Motorcar: The organization will automatically vary the fresh air ventilator speed to suit outdoor seasonal conditions and desired indoor humidity and temperature settings. This setting is recommended for cold, northern climates.

DEHUM: The system will operate the fresh air ventilator only if dehumidification is necessary. This setting is only bachelor in heating.

Refer to the Bones SETUP section of this manual to select your fresh air setting. Please note that a fresh air setting will only appear if a ventilator has been installed.

Avant-garde SETUP

Accessory Maintenance Reminders
The Infinity™ Control can remind you when information technology'south time to alter the filter, humidifier pad, UV lamps, and ventilator pre-filter with a popup message. The REMINDERS screen allows you to individually plough on or off your accessory maintenance reminders depending on which accessories are installed.

1. Flip downward the door near the base of the Infinity Control.
2. Press the ADVANCED setup button.
3. Use the SCROLL button to select the accompaniment service reminder you would like to plow ON or OFF.
4. Use the TIME (+\-) button to plow the reminder ON or OFF. A popular-up reminder will simply appear when it is fourth dimension for maintenance if ON is selected.
5. For a detailed description of accessory maintenance reminders, delight see ACCESSORY POP-Up Letters, folio fourteen in this manual.
6. Press the LEFT or RIGHT side buttons to select some other Avant-garde feature.
   – OR –
7. To exit, push the ADVANCED push or simply close the door. You lot may exit at any stage during this setup.
   NOTE: Yous can leave Advanced Setup at whatever time. When exiting, you will be prompted to save changes if you have made any. Select "YES" to save your changes, "NO" to revert dorsum to previous settings.

Lighting
You tin conform the backlighting dissimilarity, plough off backlighting altogether, or plough off the HEAT and COOL status lights (LED)s.

1. Flip down the door nigh the base of the Infinity™ Command.
2. Press the Avant-garde setup button.
3. Press the RIGHT button in one case to select the LIGHTING screen (2 of 7).
4. With the BACKLIGHT text highlighted, use the Time (+\-) push button to plough the screen'southward constant, low intensity backlighting ON or OFF.
5. Utilize the SCROLL push button to highlight Estrus/COOL LED INDICATORS text.
6. Use the Time (+\-) button to turn the HEAT and COOL LEDs on or off.
7. Use the Curlicue button to highlight Dissimilarity.
8. Use the Fourth dimension (+\-) button to increment or decrease the screen's dissimilarity level.
9. Printing the LEFT or RIGHT side buttons to select another Avant-garde feature.
   – OR –
10. To exit, push button the ADVANCED push button or simply shut the door. You lot may exit at any stage during this setup.
    Note: You can exit Advance Setup at any time. When exiting, you will be prompted to relieve changes if y'all accept made any. Select "YES" to relieve your changes, "NO" to revert back to previous settings.

Heating Humidity
If you have a whole house humidifier, heat recovery ventilator (HRV) or energy recovery ventilator (ERV) every bit a part of your system, you lot tin select your desired heating humidity setting and change how your system controls the humidifier or fresh air ventilation.

1. Flip down the door near the base of the Infinity™ Control.
2. Press the ADVANCED setup push button.
3. Press the RIGHT push twice to view the HEATING HUMIDITY screen (three of seven).
4. Use the TEMP (+\-) button to select your desired humidity setting.
5. To leave, press ADVANCED or simply shut the door.
   – OR –
6. If you desire to change how your organisation controls the heating humidity, coil to HUMIDITY. You will have iii options to choose from:
   a. OFF – The arrangement will disable humidification or ventilator dehumidification.
   b. MANUAL – The system will control the relative humidity in your home based on your desired set point.
   c. AUTO – The system will control the relative humidity in your home based on the setting you have selected and outside air temperature. The humidity target is lowered automatically every bit the outdoor temperature decreases.
7. Utilize the TEMP (+\-) button to make your selection.
8. If y'all desire to alter how your organisation controls fresh air ventilation scroll to FRESH AIR. For a description of settings run into FRESH AIR VENTILATION, page 28 in this manual.
9. Use the TEMP (+\-) button to select AUTO, Loftier, LOW OR DEHUM.
10. To exit, printing ADVANCED or simply close the door.
    NOTE: Yous can exit Advanced Setup at whatsoever time. When exiting, you will exist prompted to save changes if you take made any. Select "YES" to salvage your changes, "NO" to revert back to previous settings.

Cooling Humidity

1. Flip down the door virtually the base of operations of the Infinity™ Command.
2. Printing the Avant-garde setup push button.
3. Press the LEFT push three times to view the COOLING HUMIDITY screen (iv of vii).
4. Use the TEMP (+\-) push button to set your desired humidity level.
5. To exit, press ADVANCED or just close the door.
   – OR –
6. If you lot want to change the way cooling dehumidification is controlled, scroll to DEHUMIDIFY. Y'all volition have two options.
   OFF – The system will not actuate the cooling equipment to dehumidify if the cooling temperature has been satisfied.
   ON – The system dehumidifies past activating the cooling equipment – fifty-fifty afterwards the cooling temperature has been satisfied. The system volition not cool to dehumidify below 70° F in guild to protect equipment. Your air conditioning system will provide fantabulous humidification command with DEHUMIDIFY ready to either ON or OFF. However, you volition receive better humidification command with the ON setting.
7. Utilize the TEMP (+\-) button to make your selection.
8. To exit, press Avant-garde or just close the door.

NOTE: Yous can get out Advanced Setup at any fourth dimension. When exiting, y'all will be prompted to save changes if you lot have made any. Select "Yes" to save your changes, "NO" to revert back to previous settings.

Holiday Settings
Y'all tin pre-select temperature, humidity and fan settings for your Vacation office. These settings volition take effect when yous activate Vacation operation as outlined on pages 11-12.

1. Flip down the door virtually the base of the Infinity™ Control.
2. Press the Avant-garde setup button.
3. Press the RIGHT push button iv times to select the Holiday screen (5 of 7)..
4. Use the TEMP (+\-) push button to select the highest temperature the system will allow during VACATION operation.
5. Press downwardly on the Whorl push to select MIN TEMPERATURE.
6. Use the TEMP (+\-) push to select the lowest temperature the arrangement volition allow during Vacation functioning.
7. Press downward on the SCROLL button to select MAX HUMIDITY.
8. Employ the TEMP (+\-) button to select the highest humidity the organization will let during Holiday operation.
9. Press downwardly on the Coil button to select MIN HUMIDITY.
10. Apply the TEMP (+\-) push to select the lowest humidity the arrangement will let during VACATION operation.
11. Press downward on the Scroll button to select FAN.
12. Employ the TEMP (+\-) button to select AUTO, Low, MED or HIGH fan operation.
13. To get out, press Avant-garde or only close the door.
    Note: You can exit at any time. When exiting, you lot volition exist prompted to save changes if you lot accept made whatsoever. Select "Yes" to salve your changes, "NO" to revert back to previous settings.

Unoccupied Settings
UNOCCUPIED performance allows you lot to select maximum and minimum temperatures, humidity levels, fan speed and ventilator speed for times when your domicile will be unoccupied for a designated period of fourth dimension. These settings volition employ to all zones when activated.

1. Flip down the door most the base of the Infinity™ Command.
2. Press the ADVANCED setup button to view 1st ADVANCED setup brandish (1 of 7).
3. Press the LEFT push button twice to select the UNOCCUPIED display (6 of seven).
4. Use the TEMP (+\-) push button to prepare your MAX TEMPERATURE.
5. Press DOWN on the Coil button to highlight MIN TEMPERATURE.
6. Apply the TEMP (+\-) push button to select MIN TEMPERATURE.
7. Press DOWN on the SCROLL button to highlight MAX HUMIDITY.
8. Use the TEMP (+\-) button to set MAX HUMIDITY.
9. Printing DOWN on the Curlicue button to highlight MIN HUMIDITY.
10. Use the TEMP (+\-) button to select MIN HUMIDITY.
11. Press Downwardly on the Scroll push button to highlight FAN manner. Use the TEMP (+\-) button to select FAN style: Depression, MED, HIGH or AUTO.
12. Press Downwardly on the SCROLL button to highlight VENTILATOR mode. Utilise the TEMP (+\-) button to select VENTILATOR mode: Depression, MED, Loftier OR Motorcar.
13. To go out, press Avant-garde or simply close the door.
    Note: Y'all tin can get out at any fourth dimension. When exiting, y'all will be prompted to save changes if you have made whatsoever. Select "YES" to salve your changes, "NO" to revert back to previous settings. See "Normal Operation" section of this manual for instructions on how to select UNOCCUPIED performance.

Zone Names
You lot can proper noun each zone in your home for like shooting fish in a barrel identification. The zone names you enter volition supersede the factory default names. The zone names will appear at the Infinity™ Control and optional Smart Sensor(s).

1. Flip downwards the door nearly the base of operations of the InfinityControl.
2. Press the ADVANCED setup button to view 1st ADVANCED setup display (1 of 7).
3. Press the LEFT button to select the ZONE NAMES brandish (7 of 7).
4. The kickoff zone name will be highlighted. Y'all can change the zone name, or select a different zone by using the SCROLL push to highlight the name you wish to change.
5. Use the TEMP (+\-) push button to highlight the letter you wish to modify.
6. Use the Fourth dimension (+\-) push to select the letter of the alphabet.
7. Repeat steps v and 6 as needed to complete the zone's name.
8. Continue until all zones have been named to your satisfaction.
9. To exit, press Advanced or simply close the door.
   NOTE: Yous can exit at any time. When exiting, you volition exist prompted to relieve changes if you accept made any. Select "YES" to salve your changes, "NO" to revert back to previous settings.

SMART SENSOR Operation

Smart Sensor Operation
The Infinity™ Smart Sensor allows command and changing of zone temperature setpoints. Continuous FAN selection is available; AUTO, LOW, MED, HIGH. Other features include viewing Outdoor Temperature and Indoor Relative Humidity. Infinity Smart Sensor Functions also include Agree and UNOCCUPIED settings.

Changing Desired Temperature

• The current zone temperature will exist displayed in the LCD.
• Press COOL / HEATbutton to modify between "COOL AT" and "HEAT AT" setpoints.
• Printing Temp (+/-) button to heighten or lower setpoints.
• The default time for temporarily overriding the temperature schedule is 2:00 HRS equally indicated past the text in the lower left screen.
• Temporary override fourth dimension can be changed in fifteen-minute increments past pressing the TIME (+/-) button to increase or decrease the override timer.
  Note: Override volition not announced if programming has been turned off.

Agree / Unoccupied

• Pressing Hold / UNOCCUPIED button will brandish HOLD assuasive setpoints to remain permanent and override any existing program schedules. Pressing HOLD / UNOCCUPIED push button again will release HOLDand render to previous program schedules.
• Pressing Concur / UNOCCUPIED push button for approximately three seconds will display UNOCCUPIED status on lower left screen. Pressing button again for approximately 3 seconds will release UNOCCUPIED status and render to previous style.

Continuous Fan Adjustment
Pressing the FAN push will scroll through the following: AUTO, Low, MED, HIGH.

• When AUTO is selected, zone airflow is available but when a heating or cooling demand exists inside the zone.
• When LOW, MED, or HIGH is selected, zone airflow will be continuous without a heating or cooling need.

Outdoor Temperature and Indoor Relative Humidity
The current outside temperature is displayed in upper left corner of the LCD.

• Press and release the HUMIDITY / OAT button to view % Indoor Relative Humidity; value is measured at Zone Command (User Interface.)
• Outdoor temperature volition return afterward five seconds or after the button is pressed once more.

Keypad Lock
The Smart Sensor tin be locked if the FAN and HUMIDITY / OAT buttons are pressed simultaneously for approximately 3 seconds. A padlock icon will appear and all push button functions will exist ignored. Pressing the FAN and HUMIDITY / OAT buttons once more for 3 seconds will unlock the Smart Sensor.

Vacation

• When the Vacation way is activated from Zone Command (User Interface), the Smart Sensor will display the "VACATION" icon in the lower left surface area of the LCD. If the TEMP (+/-) push button is pressed, the override timer volition display "2-hours." This can either be increased or decreased with the Time (+/-) push button. When the override timer expires, the Holiday setpoints return.

Visit: world wide web.carrier.com Or phone call 1-800-CARRIER

A member of the United Technologies Corporation family. Stock Symbol UTX.

© Carrier Corporation 2007 OMUIZ-3CA

Manufacturer reserves the right to discontinue, or modify at any time, specifications or designs without notice or without incurring obligations.

Printed in People's republic of china

Read More About This Manual & Download PDF:

Carrier Infinity Control Thermostat Manual – Download [optimized]
Carrier Infinity Command Thermostat Manual – Download

Questions about your Transmission? Post in the comments!

Source: https://manuals.plus/carrier/carrier-infinity-control-thermostat-manual

Share this post