How To Set Up A Safety Razor

HOW TO PUT BLADES IN A SAFETY RAZOR

Read time: ii minutes

If you've read our article on choosing a condom razor, you lot'll know in that location are plenty of options available on the market place. While almost safety razors follow a similar design, there are some differences in the way they are loaded with a new blade.

In this commodity, we're going to tackle exactly that–how to correctly identify blades into each blazon of condom razor, to ensure you get the best shave without any hiccups forth the way.

Quick Tips

How to put blades in a safety razor — Hold the blade along the brusque edges

To prevent cuts, never hold by the sharp edges

Butterfly (or 1-piece) razors

These razors are the all-time option if you dislike handling petty bits and bobs. Information technology's unproblematic and straightforward. Twist the bottom of the handle in an anti-clockwise management and you'll see the doors of the caput open up, much like a butterfly unfurling its wings (hence the name).

Take your blade and place it neatly in the eye, following the alignment tabs that every razor blade has. Once secure, turn the base handle clockwise to close the caput.

2-piece & iii-piece razors

These are the most common types of prophylactic razors. Our choosing guide well-nigh safety razors summarised their differences perfectly:

"two-slice razors take a handle that is fused to the base of the head, while three-slice razors take a head that can be fully unscrewed from the handle."

Loading a blade into these razors is a similar process. First, turn the base of the handle to untighten the head.

If it's a 2-piece, the acme of the head is what detaches. From there, take your razor blade and align its holes with the caput that was detached. When lined upwards, connect it back to the safety razor and retighten past turning the base of operations of the handle clockwise.

For 3-piece razors, the difference is that when you untighten the screw, the whole head–the top cap and base–volition detach completely, leaving you with three dissever components. Again, take your razor blade and align its holes with the tabs on the cap, and then sandwich it with the base of the head. Finally, screw the handle onto the caput by turning it clockwise until finger tight.

SO WHICH 1 SHOULD I CHOOSE?

There is no right or wrong answer with this, and comes down to personal preference.

That said, you could place it into unlike contexts to help you make up one's mind. If you're a frequent traveller or yous can be a picayune clumsy sometimes, a butterfly razor is a smashing choice as there are fewer pieces to work with. Whereas, if you don't heed handling divide pieces of a prophylactic razor blade and putting them back together, then ii-slice or 3-piece razors are a pinnacle pick due to the many models available.

If yous're not certain which blades will accommodate best, take a look at our razor bract choosing guide.

And finally, if you've yet to make the switch to a safety razor, these reasons will convince you lot!